Products > Tapes > Tapes: Thermal / Flame & Fire Protection
Fiberglass with soft PTFE Impregnation Gasket Sealing Tape
550°F / 287°C Continuous Exposure: Higher Intermittent
This high temperature, heat resistant and thermal insulating PTFE coated tape offers the advantage of a non-asbestos material with a higher temperature range and with excellent resistance to almost all solvents, caustics and acids. This high temperature PTFE coated tape is used as a gasket and seal material and also as an insulation material for wire, cable, hose, tube and pipe carrying high or low temperature liquids or gases. Available in a Premium Grade and Industrial Grade (Premium is a denser and heavier fiberglass weave than Industrial).
The base fiberglass fabric is rated to 1000°F / 537°C while the PTFE melting point is 620°F / 327°C.
Available in 1/16", 1/8" and 1/4" thickness and 0.5" to 6" widths.
The high temperature and chemical resistant tape is available in Plain and Drop Warp Styles. Drop Warp tape has several of the center lengthwise yarns missing during weaving, and allows the tape to be easily used for bolt-hole applications (sometimes called a ladder tape or bolt-hole style tape).
The PTFE is applied to the sleeve by dipping the sleeve through an immersion tank of liquid PTFE dispersion. The sleeve is then air dried and high temperature sinterized, flowing the PTFE throughout the fiberglass filaments. The result is a PTFE coating on the sleeve which is soft, robust and flexible; however, it can be abrasively removed from the sleeve with aggressive fingernail scraping, resulting in a thinner and thinner layer of ptfe remaining with each pass. The PTFE also causes the yarns to be sealed and the small gaps between the yarns filled, resulting in an almost air-tight / liquid-tight sleeve wall.