Order Desk (610) 906-3549
UL2200 Engine Exhaust Thermal Insulation Blankets
Follow us on Twitter for new product announcements
Need Technical Help? Email us at: tech.abthermal@gmail.com
FAX: (610) 340-9054
Email orders: orders.abthermal@gmail.com
EU/UK Call +44 (0) 1202 233 268 Fax: +44 (0) 1202 830 425
Order Desk Tel: (610) 906-3549 . . . 8am-5:30pm Eastern M-F
Go to content
Products > Fabrics > Fabrics / Cloth: Gasket, Weld Protection, Thermal

Fiberglass Heat Cleaned Fabrics - Plain - Premium Grade


High Temperature Heat Resistant

1200°F / 648°C Continuous Exposure: Higher Intermittent

FlameShield™ high temperature, heat and flame resistant thermal insulating woven fiberglass cloth is heat treated to remove organics, set the weave dimensionally and reduce fray and loose fibers. Meets MIL-C-20079 (type I, Class 9) and US Coast Guard 164.009.

Used as a marine lagging fabric and in nuclear applications as a covering for insulation and board.

Designed for continuous operation at 1200°F / 648°C

Fabric is available in two weights; 8.5 oz/sq/yd (.018" thick) and 18.0 oz/sq/yd (.032" thick).  Roll width is available as 40 and 60 inches.

This fabric is also available with a self-adhesive backing.  The adhesive is acrylic based, and will burn-off or vaporize at temperatures above 400°F.  If prolonged use of the self-adhesive fabric above 400°F is desired, then alternate securing methods such as fasteners, wire or clamps should be used.  Personnel should avoid inhaling fumes from the PSA.

Fiberglass fabrics Heat Treated Cleaned Premium Grade
AB Technology Group
431 State Street, Box 1491, Ogdensburg, NY 13669
116 Albert Street - Suite 300, Ottawa, ON K1P 5G3
Tel: (610) 906-3549
Fax: (610) 340-9054
Email: orders@abthermal.com
Web by Archer-Technology.com
Back to content